• LINE ID: @CARRENT
  • [email protected]
VoucherCar
  • หน้าแรก
  • สินค้า
    • แยกจังหวัดรถเช่า
    • แยกตามระดับเครื่องยนต์
    • แยกตามราคารถเช่า
    • แยกตามยี่ห้อรถเช่า

    • ตะกร้าสินค้า
    • จองด่วนน้อยกว่า 7 วัน
    • รถเช่า รายสัปดาห์
  • บทความเนื้อหา
    • คำถามพบบ่อย
    • บทความรถเช่า
    • สาขารถเช่า
    • WEBBOARD
  • วิธีการสั่งซื้อ
    • วิธีการสั่งซื้อ
    • รายละเอียดการชำระเงิน
  • จองด่วน
  • ติดต่อเรา
เข้าสู่ระบบ
รถเช่าราคาประหยัดadver
รถเช่า ประเภทต่างๆ

แยกตามจังหวัด แยกตามเครื่องยนต์ แยกตามราคา แยกตามยี่ห้อ รถเช่า รายสัปดาห์

คำถามพบบ่อยเกียวกับรถเช่า ข่าวสารบทความรถเช่า สาขาบริษัทรถเช่า เว็บบอร์ด (Webboard)

วิธีสั่งซื้อ รายละเอียดการชำระเงิน
ติดต่อเรา
รถเช่า จังหวัด

---
กลับไปหน้าเว็บบอร์ด

script limit bandwidth UDP

ผู้ตั้งกระทู้: a
วันที่: 05/11/2013 เวลา: 07:39:15

เอา script ชาวบ้านมาดัดแปลงนิดหน่อยฮะ ต้นฉบับ shape ตาม IP แต่เอามาแก้ให้บีบเฉพาะ UDP

http://www.iplocation.net/tools/traffic-control.php

ซึ่งโดยการใช้งานปกติมันไม่จำเป็นต้องใช้ UDP เยอะอะไรขนาดนี้อยู่แล้ว ก็พอเอามาช่วยกันการยิง udp ออกได้อยู่หน่อยนึง

#!/bin/bash
#
# udplimiter This script limit the bandwidth for udp traffic
#
# chkconfig: - 13 87
 
### BEGIN INIT INFO
# Provides: $udplimiter
# Required-Start: $network
# Required-Stop: $network
# Default-Start:
# Default-Stop: 0 1 2 3 4 5 6
# Short-Description: start|stop|status|restart Bandwidth Limiter
# Description: This script limit the bandwidth for udp traffic
### END INIT INFO
 
 
#  tc uses the following units when passed as a parameter.
#  kbps: Kilobytes per second
#  mbps: Megabytes per second
#  kbit: Kilobits per second
#  mbit: Megabits per second
#  bps: Bytes per second
#       Amounts of data can be specified in:
#       kb or k: Kilobytes
#       mb or m: Megabytes
#       mbit: Megabits
#       kbit: Kilobits
#  To get the byte figure from bits, divide the number by 8 bit
#
 
#
# Name of the traffic control command.
TC=/sbin/tc
 
# The network interface we're planning on limiting bandwidth.
IF=eth0             # Interface
 
# Bandwidth limit (in mega bits)
BWLIMIT=5mbit          # DOWNLOAD Limit
 
# Filter options for limiting the intended interface.
U32="$TC filter add dev $IF protocol ip parent 1:0 prio 1 u32"
 
start() {
 
# We'll use Hierarchical Token Bucket (HTB) to shape bandwidth.
# For detailed configuration options, please consult Linux man
# page.
 
    $TC qdisc add dev $IF root handle 1: htb default 30
    $TC class add dev $IF parent 1: classid 1:1 htb rate $BWLIMIT
    $U32 match ip protocol 17 0xff flowid 1:1
 
# The first line creates the root qdisc, and the next two lines
# create two child qdisc that are to be used to shape download
# and upload bandwidth.
#
# The 4th and 5th line creates the filter to match the interface.
# The 'dst' IP address is used to limit download speed, and the
# 'src' IP address is used to limit upload speed.
 
}
 
stop() {
 
# Stop the bandwidth shaping.
    $TC qdisc del dev $IF root
 
}
 
restart() {
 
# Self-explanatory.
    stop
    sleep 1
    start
 
}
 
show() {
 
# Display status of traffic control status.
    $TC -s qdisc ls dev $IF
 
}
 
case "$1" in
 
  start)
 
    echo -n "Starting bandwidth shaping: "
    start
    echo "done"
    ;;
 
  stop)
 
    echo -n "Stopping bandwidth shaping: "
    stop
    echo "done"
    ;;
 
  restart)
 
    echo -n "Restarting bandwidth shaping: "
    restart
    echo "done"
    ;;
 
  show)
 
    echo "Bandwidth shaping status for $IF:"
    show
    echo ""
    ;;
 
  *)
 
    pwd=$(pwd)
    echo "Usage: $0 {start|stop|restart|show}"
    ;;
 
esac
 
exit 0

เอาไปเซฟใส่ /etc/init.d/udplimiter แล้วสั่ง /etc/init.d/udplimiter start ได้เลย ถ้าจะให้ทำงานตอนเปิดเครื่องอัตโนมัติด้วยก็ chkconfig udplimiter on

อ้อ อย่าลืมแก้ชื่อ interface ด้วยนะครับ ตรง IF=eth0



http://www.icez.net/blog/76175/0154-script-limit-bandwidth-udp

ความคิดเห็นทั้งหมด
ยังไม่มีความคิดเห็น มาร่วมแสดงความคิดเห็นเป็นคนแรกสิ!
ร่วมแสดงความคิดเห็น

Copyright © 2026 vouchercar.com

*** ไม่อนุญาตให้ลงโฆษณาขายสินค้าใดๆ ก่อนได้รับอนุญาตจากทางเว็บนะคะ ***